What Calsense models do you support?

We program and manage all Calsense CS3000 variants — wall-mount, pedestal, 2-wire, and solar-powered systems — with full FLOWSENSE flow monitoring and Calsense Connect cloud management.

What is FLOWSENSE and why does calibration matter?

FLOWSENSE is Calsense's integrated flow monitoring. When calibrated to your site's actual GPM profiles, it detects leaks and breaks automatically. Generic defaults produce nuisance alarms or silence during real problems.

How does Calsense group-based scheduling work?

Calsense's group structure determines how programs interact with your water window. Properly structured groups prevent hydraulic conflicts, optimize cycle-and-soak, and enable independent management of different site areas.

Do you manage Calsense sites remotely nationwide?

Yes. We manage Calsense systems via Calsense Connect from anywhere in the continental US, with on-site support available where needed.

Calsense CS3000 Expert Management

Calsense CS3000: Expert Programming
For Weather-Based Commercial Irrigation

Irrigation Managers has programmed hundreds of Calsense CS3000 controllers — wall-mount, pedestal, 2-wire, and solar-powered systems — for commercial, municipal, and institutional landscapes. We've mastered the nuances of group-based scheduling, FLOWSENSE flow monitoring, and Calsense Connect management through over a decade of hands-on field experience.

100%

FLOWSENSE calibration on every managed site

50%+

Typical water reduction with complete programming

10+ yrs

Calsense programming and management experience

Get a Free Calsense Assessment Download Free Guide

✓ No obligation · ✓ All CS3000 variants · ✓ Remote service nationwide

Why Calsense Sites Need Expert Programming

The CS3000 is a highly capable platform — but most installations use a fraction of what it can do. Incomplete programming is the gap.

Group Structure

Calsense's group architecture determines how programs interact with your water window. Incorrect structure creates hydraulic conflicts and wastes the window you have.

FLOWSENSE Calibration

Flow monitoring is only effective when thresholds match your site's actual GPM. Generic defaults produce nuisance alarms or silence during real leaks.

ET & Weather Integration

Weather-based scheduling adjusts runtimes based on ET — but only as accurately as the site-specific plant and soil data entered for each station group.

Calsense Connect

Remote programming, monitoring, and alert management through Calsense's cloud platform — configured with appropriate access levels for your team.

Cycle-and-Soak Coordination

Soak periods prevent runoff but consume your window if not configured to run other zones productively during recovery.

Performance Reporting

Monthly water use tracking against your site-specific goal, with documentation proving what changed.

Why Most Calsense Sites Are Underperforming

Most CS3000 installations are partially programmed. Water runs. Zones fire. But the features that deliver real savings were never set up correctly.

Group Structure Conflicts Limit Your Water Window

When groups aren't structured around your site's hydraulic capacity, programs compete for the window — and the system can't use it efficiently.

FLOWSENSE Enabled But Not Calibrated

Most Calsense sites have FLOWSENSE connected but at factory defaults. The result is either constant false alarms or no alarm when a mainline breaks.

ET Inputs Are Generic, Not Site-Specific

Weather-based scheduling is only as accurate as the plant type, soil type, and head data entered per station group. Generic data produces generic results.

Alert Routing Reaches the Wrong People

Every alert FLOWSENSE generates is worthless if it goes to an unmonitored inbox, or if thresholds aren't calibrated to real site variation.

What Complete Calsense Management Includes

💧
Water Use Analysis & Goal-Setting
We establish how much water your site actually needs — the baseline every other improvement is measured against.
⚙️
Group Structure & Program Optimization
Group architecture built around your site's actual use patterns and hydraulic capacity to eliminate conflicts and window waste.
🔔
FLOWSENSE Calibration & Alert Testing
Over- and under-flow thresholds calibrated to actual GPM profiles with full alert chain tested before you rely on it.
🌤️
ET & Weather Input Configuration
Accurate plant type, soil type, and precipitation rate data for every station group so the controller adjusts to real conditions daily.
📡
24/7 Remote Monitoring via Calsense Connect
Continuous monitoring with alert interpretation and field team guidance through Calsense Connect.

Key Services for Calsense Sites

Water Use Analysis

Baseline and goal-setting before any programming changes are made.

Controller Programming

Group structure, ET calibration, FLOWSENSE calibration, and soak cycle setup.

Proactive Monitoring

24/7 monitoring via Calsense Connect with alert response and field guidance.

Reporting & Analytics

Monthly water savings reports against your documented baseline.

View All Services

Transparent, Zone-Based Pricing

Pay for what you use. Savings typically exceed the management fee from day one.

Team Support & Guidance

From $1/zone/mo

Programming guidance and scheduling support — with expert oversight on FLOWSENSE and group structure calibration.

Enhanced Support

From $3/zone/mo

Complete CS3000 programming, FLOWSENSE calibration, ET configuration, Calsense Connect monitoring, and seasonal optimization.

Full Irrigation Management

From $5/zone/mo

Full end-to-end Calsense management — programming, monitoring, flow calibration, seasonal transitions, and documented performance reporting.

Enterprise

Custom

Multi-site portfolios and organizations needing custom SLAs and reporting. Contact us for a quote.

On-site services available at additional fees. Contact us for a custom quote.

Ready to Get Full Performance from Your Calsense System?

Complete programming and expert monitoring unlock the savings your CS3000 was designed to deliver.

Get a Free Calsense Assessment Get Our Free Guide

✓ All CS3000 variants · ✓ FLOWSENSE calibration · ✓ Remote service nationwide

Service Packages

Remote Services

Expert, efficient, and cost-effective nationwide coverage. With over 15 years of fine-tuned remote processes, we handle all technical expertise — programming, monitoring, analysis, optimization, and step-by-step guidance — while your team manages on-site physical tasks.

On-Site Service

Available for all services (additional fee may apply) performed by Irrigation Managers or our trusted subcontractors. Contact us to discuss fit and details.

Notes: Specific deliverables may vary based on controller model(s) and specific setup. We always pursue the most effective path to results.

Calsense CS3000: Expert Programming
For Weather-Based Commercial Irrigation